T-SERIES ACCESSORIES - VENT AXIA - http://www.comfortagencies.com

Navigation

PRINTABLE VIEW

TELL A FRIEND

ADD TO FAVORITES

T-SERIES ACCESSORIES

VENT-AXIA T-SERIES \\\ ACCESORIES

T-SERIES CONTROLLERS

SURFACE MOUNTING & FLUSH FITTING CONTROLLERS
One controller for T-Series ventilating units, giving greater flexibility of control over the indoor environment. Where a T-Series controller is used, 5-core flexible cord is required.

FEATURES

New finger-tip slider
Double pole On/Off switching
3-speed operation. High, medium or low
Exhaust/intake airflow direction
Automatic sensor mode for use with suitable electro-mechanical switches
Unique shutter open, fan Off setting
Neon indicator to show when the controller is switched on
TSC controllers are UL and cUL listed
Ambient operating temperature 0°F to +102°F.
Supply voltage 120V/1/60Hz

When used with a controller, the speed control pack is removed from the T-Series ventilating unit and fitted into the 3-pin socket in the back of the controller. T-series controllers are not for use with any other range.

Registered design numbers: 1 030 207 Surface Mounting controller, 1 030 208 Flush fitting controller. Patented Remote Speed Control Circuit. European Patent number EP 0180311.

SURFACE MOUNTING

A single unit controller for use with all T-Series ventilating units. With knockouts for recessed wiring.

Dimensions: 3 3/8" x 6 1/8" x 2 1/8" (H x W x D).
Stock Ref. No. 36 11 11

FLUSH FITTING METAL BOX
Hole for wall box: 3 1/8 " x 5 7/8 " x 2" (H x W x D).
Stock Ref. No. 40 01 90

T-SERIES DIRECT MOUNT SPIGOT

Used to connect Flexible ducting directly to the inlet side of all T-Series models and the outlet side of T-Series window models.
Manufactured in flame-retardant high impact thermoplastic.

T-SERIES EXTENDED FIXING ROD SET

For use with T-Series window and roof models fitted through walls. Consists of a set of rods which are cut to suit the wall thickness.
Maximum thickness of wall 14 1/2".

ROOF PLATE ASSEMBLY

Vent-Axia Roof plate assemblies are manufactured in high impact thermoplastic. They consist of a strong one piece moulded plate with extended sides to assist flashing and weather protection. A separate sub-frame is provided for permanent fixing to the roof curb. The Vent-Axia Roof model is then fitted to the plate using a suitable sealing compound between the Cowl and plate, ensuring a weather-tight seal.

VENT-AXIA T-SERIES